IMV Vibration Test System

TC-Series(3-Axis Changeover Systems)

Depending on the reference PSD or other operating conditions such as the specimen, one part of the controlled response may deviate from the reference PSD

Features:
  • Durability
  • Accurate dimensions
  • Longer service life

Other Details:

  • Compact and Silent type
  • Easy to move/ Carry
  • Built in cooling fan and low acoustic noise
  • Temperature,humidity & vibration can be performed
  • When combined with chamber(combined system)

Vibration Test System C-Series

Large displacement is ideal for heavy weight transportation testing.

C-series is optimised for transportation tests

Heavy Weight Load

The improved load capacity realizes vibration testing with heavy weight specimen.

Large Maximum Displacement

C-series is suitable for low-frequency, high-displacement tests commonly used in transport vibration testing.

Power supply required is 3-phase 200/220/240/380/400/415/440V,5 0/60Hz. Voltage Down Transformer (Step-down transformer) is req uired for other voltage.

Frequency range values vary according to sensor and signal generator.


Additional Information:
  • Item Code: ISeries

Vibration Test System K-series

High excitation force and silent water cooled system for improving test environmentK-series, high excitation force water cooled vibration simulating test systems fully developed by IMV.
Advanced performance from the K-series will significantly improve the test environment.

Specification:

Silent system design

  • The water cooling system produces neither the intake nor exhaust sounds that an air cooling system emits.
  • Record of significant accomplishments IMV has been developing the most advanced water cooled system.
  • Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
  • Power supply: 3-phase 200/220/240/380/400/415/440V, 50/60 Hz. A transformer is required for other supply voltages.
  • If the tests (Sweep or Spot) include high velocity, the maximum velocity value should be reduced to 1.4 m/s.
  • Bypass circuit is needed. Please contact IMV or your local distributor for further information.
  • The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure.
  • In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.
  • Frequency range values vary according to sensor and vibration controller.
  • Mass and dimensions may change for CE-marked systems.

 

Vibration Test Systems J-series

J-series accommodates high velocity and large displacement testing.Long duration shock tests require high velocity and large displacement.
J-series is a high-functionality system that offers usability and durability furnished with functions that accommodate high velocity and large displacement testing.

 

Specification:

Expanded maximum test range
  • Maximum velocity of Sine force: 2.4m/s
  • Maximum velocity of Shock force: 4.6m/s
  • Maximum displacement: 100mmp-p

 

Patented upper (armature) support system PS Guide
  • Parallel Slope Guide is standard

 

Low noise
  • Optimised design of the air intake based on fluid dynamics has reduced the air-intake noise.

 

All models can be directly coupled to a climatic test chamber

Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.

Power supply: 3-phase 200/220/240/380/400/415/440V, 50/60 Hz. A transformer is required for other supply voltages.

Above 2000 Hz, the force rolls-of f at a rate of -12 dB/oct.

Maximum velocity 4.6m/s. High velocity restricts maximum Shock force. Please contact IMV or your local distributor with specific test requirements.

The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70% must be applied. Continuous use at maximum levels may cause failure.

In the case of Random vibration test, please set the test definition of the peak value of acceleration waveform to be operated less than the maximum acceleration of Shock.

Frequency range values vary according to sensor and vibration controller.

Mass and dimensions may change for CE-marked systems.

TS-Series (3-Axis Simultaneous Systems)

Depending on the reference PSD or other operating conditions such as the specimen, one part of the controlled response may deviate from the reference PSD

Features:
  • Compact and Silent type
  • Easy to move/ Carry
  • Built in cooling fan and low accoustic noise
  • Temperature,humidity & vibration can be performed
  • when combined with chamber(combined system)

High Grade Range Vibration Test System

A new standard created by listening to our customers.
  • A wider range of test requirements and higher test specications.
  • A-series meets the needs for such a versatile test environment.
  • Advanced automatic energy saving, high level of functionality and a protected test environment.
  • A series improves the working environment of vibration testing.

 

Improvement in excitation force:

  • Increased force per system power requirement
  • Increased force per system mass
  • Increased force per system size

 

Standard 76.2mmp-p displacement:

  • A-series has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement. This single system can be used in a very wide variety of tests.

 

Increase in frequency range:

  • A-series has wider frequency range than conventional systems.(Secured stroke of A30, A45 & A65 is 76.2 mmp-p based on mechanical stroke 82 mmp-p)

 

Cross-axis acceleration reduction:
A series dramatically reduces cross-axis (crosstalk) acceleration (horizontal vibration). Highly accurate testing is achieved.

 

High velocity shock testing:

  • Only for A30,A45, A65
  • A-series(EM amplifier model)provides a maximuim of 3.5m/s shock velocity testing which has not been possible with standard conventional systems(i,J-series).

 

Lower power consumption:

  • In comparison with the same class of conventional systems (i,J-series), the A-series achieves lower power consumption. With an automatic energy-saving function increased energy saving is achieved across all force ranges.

 

International safety standards:

  • A-series complies with international safety standards.

 


Additional Information:
  • Item Code: DCSeries

Vibration Test Systems VSH-Series

Suitable for Bench-top Simulation
  • Suitable for various types of bench-top testing.
  • Vibration controller: Enables complicated vibration tests being coupled with the vibration controller.

 

Specification:

  • Frequency range values vary according to sensor and signal generator.
  • The above are specifications under bare table condition.
  • The maximum acceleration decreases when accelerometer and mounting adapter are mounted.
  • Power supply voltage 3 phase AC200V±10%, 50/60Hz Voltage down transformer [step-down transformer] is required for other voltage

Additional Information:
  • Item Code: TCSeries

Environmental Test Systems

Environmental Test Systems Manufactured products can be exposed to both thermal and mechanical stresses.
These should not be considered separately, as the effects may be linked.

IMV can supply vibration-test systems combined with climatic chambers to provide complete vibration, temperature and humidity environmental testing.
These systems can be custom-designed to meet your application.
  • Chamber for Vertical Excitation
  • Chamber for both Vertical and Horizontal Excitation

Horizontal slip table combined vibration test system.
Combining a rail support for horizontal move and a lift support for vertical move, chamber combined test for both vertical and horizontal axis.

  • Rail and lift support
  • Option for chambers for both vertical and horizontal excitation
  • Rail support and door with observation window
Space-saving rail support for vibration test system.
The test specimen can be monitored using the observation window in the door.

Additional Information:
  • Item Code: TSseries

IMV Vibration Test Systems M-Series

Silent type appropriate for abnormal noise inspection Compact and silent design, but also powerful for full-scale test.

Silent design employing a built-in cooling fan DC powered cooling fan is built-into the shaker. Natural air cooling is also used when the cooling fan is stopped for silent operation. (with a reduction in performance)Axis changeover vibration test system

A range of small-size systems, including 2-axis and 3-axis simultaneous systems, employing the popular m-series vibration generators and patented Integrated Cross Coupling Bearing Unit (ICCU) multi-axis armature / load support technology.

Compact design Low noise (ideal for squeak-rattle testing) High precision measurement Low power consumption

Vibration Test System

Suitable for bench-top simulation
  • Ideal for bench-top testing.

Compact
  • Portable
Compatible vibration controllers
  • Versatile vibration controller provides wide range of test types.

 

Specification:

  • Frequency range values vary according to sensor and signal generator.
  • The above are specifications under bare table condition.
  • The maximum acceleration decreases when accelerometer and mounting adapter are mounted.
  • Power supply voltage 1 phase AC100V±10%, 50/60Hz
  • Voltage down transformer [step-down transformer] is required for other voltage

DC-Series (2-Axis Changeover Systems)

Depending on the reference PSD or other operating conditions such as the specimen, one part of the controlled response may deviate from the reference PSD

Other Details:
  • Operation with Android tablet PC / WiFi wireless
  • Light and compact size
  • High speed signal response
  • Low power consumption

Specifications:

ItemSpecification
InterfaceWireless LAN IEEE802.11b/g, In conformity to WiFi 128bit WEP, WPA/WPA2
Cable USB USB2.0,Visual COM port and Direct Connection
Wireless Communication ModeInfrastructure Mode
Built-in Memory Capacity4Mbit×16bank
Power Supply2 pcs. of AAA battery
Consumption CurrentUnder measurement (During Use of WiFi) : about 150mA
Ambient Temperature+5???+50??? (Guaranteed by attached battery )
Ambient Humidity3090% No condensation
Sampling FrequencyMax. 76.8kHz
AD Resolution16bit
Effective Measuring Frequency220kHz
Operational Tablet OSAndroid3.2, Android4.1*only Android OS approved by IMV

TTS-Series (6 Degrees of Freedom Systems)

At least 6 vibration shakers are located in 3D space with integrated control and can create 6 degrees of freedom motion (3 translation degrees of freedom and 3 rotating degrees).
In addition to X, Y, Z axis motion, rotational motion, Roll, Pitch and Yaw is also possible utilising spherical bearings.
Using electro dynamic vibration generators, IMV systems can reproduce waveforms which have components in a wide frequency range with a high degree of accuracy. System maintenance is easy. Systems comprise at least six vibration generators to act along orthogonal axes and also to generate the roll, pitch and yaw components of vibration. A spherical bearing is used to allow the rotational motion. By using electrodynamic vibration generators the system can operate over a wide frequency range with a high degree of accuracy. System maintenance is straightforward.

Ride comfort evaluation system:

The addition of rotational motion to a three-axis system enables 6 degree-of freedom testing, as is required for vehicle seat evaluation, for example.

 

Large-scale 6 DOF Vibration test system:

A total of 10 vibration generators (6 vertical and 4 horizontal) and a 4000mm by 3500mm large size table allow the simultaneous 6 DOF vibration testing. This versatile platform is ideal for testing large items such as railway carriage components.

 

6 DOF simultaneous squeak and rattle test system for vehicle seats:

Air-cooled vibration test system for the evaluation of squeak and rattle noise from an instrument panel or other car interior assemblies.

2- Axis Simultaneous Systems

Depending on the reference PSD or other operating conditions such as the specimen, one part of the controlled response may deviate from the reference PSD

Specification:
  • Voltage: 240V
  • Power: 15kW
  • Type: Automatic

Chamber for Multi-Axis Excitation

Model Syn-4HA-40-M
Internal dimensionsW1200×D1200×H1000mm
Temperature range-40℃ +150℃
Humidity range20% 98%RH
Temperature pull
down time
+20℃ => -40℃ In 80 minutes
(Load condition:combined +
aluminum 60kg)
Temperature heat
up time
-40℃ => +150℃ In 80 minutes
(Load condition:combined +
aluminum 60kg)

Chamber for Multi-Axis Excitation Model: Syn-3HA-40-M

Model Syn-3HA-40-M
Internal dimensionsW1000×D1000×H1000mm
Temperature range-70??? +180???
Humidity range20 98 RH
Temperature pull
down time
+20??? => -70??? In 40 minutes
(Curve gradient)
Temperature heat
up time
-70??? => +180??? In 40 minutes
(Curve gradient)

Multi Axis Vibration Test Systems

Multi Axis Vibration Test Systems TS 9600 40l

Features:

  • High level arithmetic processing which controls 10 corresponding points without any stress.
  • Allows a couple of control corresponding waveform to be the same.
  • Max. 96ch measurement is possible by developing specialized hardware and software.
  • Software offers necessary analysis required by JIS E 4031.

Additional Information:
  • Item Code: TS9000

Vibration Signal Converter

Vibration Signal Converter:

  • High performance and low cost
  • Small size, attachable with DIN rail
  • Switchover Measurement Mode, switchover Measurement Range
  • Acceleration / Velocity / H Function / H Function CF
  • Only for VM-80DA
  • Velocity / Displacement (VM-90 DV / DVL)
  • Substantial basic functionsOne step alarm outputDC4
  • 20mA level outputAC±5V monitor outputLevel indication
  • CF: Crest Factor
  • Peak Factor

Multi Axis Vibration Test Systems

Multi Axis Vibration Test Systems TS 2000s 15l

Features
:
  • Reproduce waveforms in wide frequency range with a high degree of accuracy.
  • Silence
  • Smooth test start-up

 

Specification:

  • Voltage: 210V
  • Power: 15-18kW
  • Type: Automatic

Additional Information:
  • Item Code: TS2000

Highly Accelerated Stress Test System

Specification:
  • Humidity resistance evaluation tests for electronic components
  • Customers require test results that correlate accurately to those from the field in a minimal amount of time
  • The Highly Accelerated Stress Test Chamber EHS Series offer high performance, functionality and ease of use, and are compliant with the international IEC60068-2-66 standard
  • Many convenient functions and safety features are included for bias testing

Additional Information:
  • Item Code: EHS-221MD

I-Series Vibration Test System

Enhanced system performance extends test capabilities Vibration tests have become diversified and specifications have become increasingly strict.
i-series offer a user-friendly lineup with enhanced performance and durability.

 

Expanded test range: maximum values that the i-series can offer
  • Maximum acceleration: 1250m/s2
  • Maximum velocity: 3.5m/s
  • Maximum displacement: 51mmp-p
  • Maximum loading mass: 1,000kg

 

Patented upper (armature) support system PS Guide
  • Parallel Slope Guide is standard

 

Low noise
  • Optimised design of the air intake based on fluid dynamics has reduced the air-intake noise.

 

All models can be directly coupled to a climatic chamber.

Additional Information:
  • Item Code: EMSeries
Looking for IMV Vibration Test System ?
© Sams Advanced Climatic Technologies Pvt Ltd
 
Desktop Site Back to top