Equilam NA Testing Equipment

Salt Spray Chamber

We are among the reputed organizations, highly engaged in providing a premium quality grade of Salt Spray Chamber. As per with industry defined guidelines, equipment is designed to meet all major international standards including ASTM B117 (SS), ISO 9227 (SS, CASS, AASS), ASTM B368 (CASS), ASTM G85-A1 (AASS),JIS Z2371 to meet customer requirements. Equipment is built with double wall fiberglass ensuring low maintenance.
We design these salt spray chambers by making use of finest material and leading edge technology. In order to assure quality these salt spray chambers are examined by vendor’s quality experts. Our customers can take these salt spray chambers from us at market leading rates.

Features:

  • Water Jacket
  • Lid designed with smooth surface and without seams per ASTM B117, to prevent contamination of samples from water drips.
  • Unibody
  • Central Atomization Tower built to ASTM B117 standards ensure fog uniformity and homogenous test results.

Corrosion Test Chamber

CCT (or cyclic) chambers provide the closest comparison to “real world” laboratory testing for naturally occurring corrosion. Specimens under test are exposed a series of different environments such as:

Salt Fog with humidity, saturated humidity, dwell, Test time, atmospheric conditions, recipes are all controlled by PLC/touch screen including diagnostics and alarms. All equipment is built to UL508a standards. Unlike salt spray testing, CCT testing correlates closer to realistic, naturally occurring conditions, but with a setup change this equipment can also test under Prohesion type testing as described by ASTM G85 A5.

The CCT series is designed to meet strict construction protocaul cited by ASTM, DIN, ISO, JIS, MIL and other standards. Three sizes to choose from,
CCT600, CCT1300 and CCT3000 with software provided for easy programming and periodic/preventative maintenance.

Automatic Cushioning Shock Tester

Automatic Cushioning Shock Tester ACST-200 - Shock Testing Machine :-

Dynamic characteristic test of cushioning materials can be tested. Also, in a test repeated an automatic operation, reduction in cushioning effect and loss in thickness which result from impact applied repeatedly can be measured.

The impact rate change characteristics of the dimensions load-change characteristics and consistent dimensions load is simply acquired.
The buffering characteristic is simply acquired using buffering characteristic analysis software.
A control device can perform operation altogether except setting of the weight and the fall height of the fall weight and the size of a specimen.
The rebound stop equipment of the fall weight is equipped.

 

Feature:-
  • The impact rate change characteristics of the dimensions load-change characteristics and consistent dimensions load is simply acquired.
  • The buffering characteristic is simply acquired using buffering characteristic analysis software.
  • A control device can perform operation altogether except setting of the weight and the fall height of the fall weight and the size of a specimen.
  • The rebound stop equipment of the fall weight is equipped.

Applications:-Testing of cushioning materials (cardboard boxes, expanded polystyrene, urethane foam and etc).

 

Specifications :-

Model

ACST-200

Specimen max size (mm)

220 x 220 (area of 484 square centimeters.)

(approx inch)

8.66 x 8.66

Fall weight (kg)

Lightweight type : 2.3 kg - 10.0 kg
Heavyweight type : 5.0 kg - 50.0 kg

Acceleration (m/s2)

3000m/s2 (300G)

Drop height (mm)

1200 mm

(approx inch)

47.24 inch

Size (W x D x H mm)

W565 x D740 x H2730

(approx inch)

22.24 x 29.13 x 107.48

Capacity

480 kg

(approx lbs)

1058.2 lbs

Controller Size (W x D x H mm)

W575 x D750 x H1220

(approx inch)

22.64 x 29.53 x 48.03

Power supply

AC200V 3-phases 5A

Applied Standards

JIS Z 0235-2002, ASTM D 1596-02(2009), MIL-C-26861-87

Packaged Freight Drop Tester Machine

Drop Tester / Drop Machine for Packaged Freight (Slide) DTS-50 - Drop Testing Machine

Basic test of package specifications including a cushioned package design, selection in packaging materials, fragility of packaged contents, standard test of packaged freights (surfaces, corners, edges), etc. can be performed efficiently with a high accuracy.

Air cylinder and strong tension spring makes it possible to achieve accurate falling posture of the packaged freight and quick testing cycle way.

  • Feature200 mm ( approx 7.8 inch ) drop height increments up to 1200 mm ( approx 47 inch ).
  • Improvement in a test cycle.
  • Drop test with any preferable edge angle.
  • Simple operation by a controller.
  • Small noise ( 75dB ). at the 1 m (3.2 ft)point in radius.
  • Applications Free drop test of packaged freights.
  • Fragility test of products.

Specifications

Model

DTS-50

Specimen max weight

50 kg

(approx lbs)

110 lbs

Specimen max size (mm)

900 x 900 x 510

(approx inch)

35 x 35 x 20

Drop height range (mm)

200 mm up to 1200 mm * optionally up to 1800 mm

(approx inch)

8 inch up to 47 inch * optionally up to 71 inch

Operation with drop test

High-speed vertical & rotational motion.

Size (W x H x D mm)

920 x 1975 x 1480

(approx inch)

36 x 78 x 58

Capacity

300 kg

(approx lbs)

661 lbs

Power supply

AC200V 3 phase 3A

Air pressure

0.6 MPa or more

Usage environment temperature range

5 C (41 F) - 35 C (95 F)

Applied Standards

JIS-Z-0202, JIS C 60068-2-31

Brittle Point Temperature Tester

Option:

  • Chuck for JIS K 7216-A, K 6261-A, ASTM D746-I (Individual mounting type)
  • Chuck for JIS K 6261-B, ASTM D746-II (Individual mounting type)
  • Chuck for JIS K 7216-B, ISO 974, ASTM D746-III (Group mounting type)
  • Chuck for JIS K 7216-B, ISO 974, ASTM D746-III (Individual mounting type)

Specifications:
ModelFS (Refrigerator type)
Cooling systemRefrigerator Refrigerant: Primary HFC-134A Secondary HFC-23
RefrigerantEthanol, approx. 10L
Number of samples5 samples for one chuck
Temperature-70 ~ 40°C
Standard chuck2 set of JIS K 7216-A type (Group mounting Type)Others are option
ElectricalAC100V, 1-P, 30A, Other voltages also possible
Dimensions65(W) x 70(D) x 125(H)cm
Net weightApprox. 190kg

Additional Information:
  • Item Code: Model-FS

Digital Thickness Meter

Specifications:
ModelA-1
Testing methodK 6250
Measurable itemsVulcanized rubber
Anvil dia. (mm)5
Load (gf)80
Minimum indication (mm)0.01
OptionMini Printer
ElectricalBattery SR44 x 1
Dimensions10(W) x 17(D) x 24(H)cm
Net weightApprox. 3.4kg
Looking for Equilam NA Testing Equipment ?
© Sams Advanced Climatic Technologies Pvt Ltd
 
Desktop Site Back to top