Drop Testing Machine

Packaged Freight Drop Tester Machine

Drop Tester / Drop Machine for Packaged Freight (Slide) DTS-80 - Drop Testing Machine

Basic test of package specifications including a cushioned package design, selection in packaging materials, fragility of packaged contents, standard test of packaged freights (surfaces, corners, edges), etc. can be performed efficiently with a high accuracy.Air cylinder and strong tension spring makes it possible to achieve accurate falling posture of the packaged freight and quick testing cycle way.

Feature

200 mm ( approx 7.8 inch ) drop height increments up to 1800 mm ( approx 70.8 inch ).
Improvement in a test cycle.
Drop test with any preferable edge angle.
Simple operation by a controller.
Small noise ( 75dB ). at the 1 m (3.2 ft)point in radius.

ApplicationsFree drop test of packaged freights.
Fragility test of products.

Specifications

Model

DTS-80

Specimen max weight

80 kg

(approx lbs)

176 lbs

Specimen max size (mm)

900 x 900 x 575

(approx inch)

35 x 35 x 23

Drop height range

200 mm up to 1800 mm

(approx inch)

8 inch up to 71 inch

Operation with drop test

High-speed vertical & rotational motion.

Size (W x H x D mm)

1000 x 2583 x 1750

(approx inch)

39 x 102 x 69

Capacity

420 kg

(approx lbs)

926 lbs

Power supply

AC200V 3 phase 5A

Air pressure

0.7 MPa or more

Usage environment temperature range

5 C (41 F) - 35 C (95 F)

Applied Standards

JIS-Z-0202, JIS C 60068-2-31

Packaged Freight Drop Tester Machine DT-300

Drop Tester / Drop Machine for Packaged Freight DT-300 - Drop Testing Machine

Basic test of package specifications including a cushioned package design, selection in packaging materials, fragility of packaged contents, standard test of packaged freights (surfaces only), etc. can be performed efficiently with a high accuracy. Feature Free drop in precise posture
The table which carried a specimen carries out fall operation holding the product, and free-drop for a specimen in precise posture.
Controll drop height
The drop height of packaged cargo is performed by digital set-up of a control device, and risen to specification height by motor-brock, and is separated by drop switch after holding a position in air brake.
Anti-rebound of drop table
When the specimen table is dropping to base, the shock absorber and the air brake will stop the table rebound as the table will be stored in the groove of base and be kept from bounding on the base upper surface.
Taiking care for safty use
The drop operation cannot be activated when the the specimen table does not set to drop height position.
In order to prevent unprepared drop operation, drop test is operated by two push-button switches.
As accessories, equip the base with Photoelectronic Sensor, it will stop drop test when it detects worker's leg and something on the base.

Applications
Heavy packaged cargo of free drop test from a minimum of 1 cm to 100 cm
is available.

 

Specifications:

Model

DT-300

Specimen max weight

300 kg

(approx lbs)

661 lbs

Specimen max size (mm)

W1600 x D1200 x H1500

(approx inch)

W63 x D47 x H59

Drop height range

50 mm up to 1000 mm

(approx inch)

2.0 inch up to 39 inch

Drop attitude

Digital setup by a controller

Drop height setting

Digital setup by a controller

Brake of lifting table

Shock absorber and Counter-pressure brake

Size

W1700 x D1800 x H2600

(approx inch)

W67 x D70 x H102

Capacity

3600 kg

(approx lbs)

7920 lbs

Power supply

AC200V 3 phase 7A

Air pressure

0.7 MPa or more

Applied Standards

JIS Z 0200, JIS Z 0202, ISO 2248

Electrical Equipment Drop Tester Machine

Drop Tester / Drop Machine for Laptop PC, Electrical equipment, and other various specimens. DT-205 / DT-205H - Drop Testing Machine

Enable to test the endurance against drop impact. DT-205 / 205H can cover the various specimens from Laptop PC to drink bottle. The maximum specimen weight is 5kg ( 11lbs ). The specimen is lifted to the dropping height with the motor. The specimen holding system can provide the drop tests superior in reproducibility.

 

Feature Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
Auto winding machine –
lift the specimen and specimen holding system to the dropping height.
Safety design –
The electromagnetic holder never release the specimen holding system till it’s energized.

Applications Drop test for Laptop computers and electrical equipment.
Drop test for packaged goods and various samples.

Specifications

 

Model

DT-205

DT-205H

Specimen max weight

5 kg

(approx lbs)

11 lbs

Drop height range

250 mm up to 1500 mm

250 mm up to 2000 mm

(approx inch)

9.8 inch up to 59 inch

9.8 inch up to 78.7 inch

Setting of drop height

Scale and pointer

Holding / Releasing specimen

Air pressure pen cylinder and electric magnet

Size (W x H x D mm)

700 x 2400 x 600

900 x 3000 x 800

(approx inch)

28 x 94 x 24

36 x 118 x 32

Weight

180 kg

280 kg

(approx lbs)

397 lbs

617 lbs

Power supply

AC100V single phase 5A

Supply Air Pressure

0.69 MPa

Usage environment temperature range

5 C (41 F) - 35 C (95 F)

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

 

 

 

Tablet Terminal Drop Tester Machine

Tablet Terminal Drop Tester Machine - Drop Testing Machine :-

Enable to test the endurance against drop impact. DT-202TB is modified from DT-202 by expanding the specimen holding range to cover the growing tablet terminal test requirement. The specimen holding system can provide the drop tests superior in reproducibility.
Drop Tester DT-202TB comply with CE marking requirements.

Feature:-Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
Safety design –
the electromagnetic holder never release the specimen holding system till it’s energized.

Applications
Drop test for tablet terminal and mobile computers.
Drop test for any electrical parts and small, light-weight object.

 

Specifications

 

Model

DT-202-TB

Specimen max weight

2 kg

(approx lbs)

4.4 lbs

Drop height range (mm)

250mm to 2,000mm

(approx inch)

10 inch to 78 inch

Drop height setting

Scale and setting pointer

Holding / Releasing specimen

Pneumatic pen cylinder

Size (W x H x D mm)

600 x 2382 x 616

(approx inch)

24 x 94 x 24

Weight

80 kg

(approx lbs)

176 lbs

Power supply

100-240V single-phase 5A

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

Supply Air Pressure

0.49Mpa is required ( 1.2dm3 when tests 6 times / min )

Smartphones Drop Tester Machine

Drop Tester / Drop Machine for smartphones, cell phones, - Drop Testing Machine

Enable to test the endurance against drop impact. DT-202 provide fragility test for smart phones, cell phones and other mobile gadgets. The specimen holding system can keep the dropping posture, enable to provide drop tests superior in reproducibility.

Drop Tester DT-202 comply with CE marking requirements.

Feature Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
Safety design – the electromagnetic holder never release the specimen holding system till it’s energized.

Applications
Drop test for digital gadgets ; smart phones, cell phones, and digital gadgets.
Drop test for any electrical parts and small, light-weight object.

Model

DT-202

Specimen max weight

2 kg

(approx lbs)

4.4 lbs

Drop height range (mm)

250 mm up to 2000 mm

(approx inch)

10 inch up to 78 inch

Drop height setting

Scale and setting pointer

Holding / Releasing specimen

Pneumatic pen cylinder

Size (W x H x D mm)

600 x 2382 x 500

(approx inch)

23.62 x 93.78 x 19.69

Weight

80 kg

(approx lbs)

176 lbs

Power supply

100-240V single-phase 5A

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

Supply Air Pressure

0.49Mpa is required ( 1.2dm3 when tests 6 times / min )

Rotating Drum Tester Machine RDT-1000

Rotating Drum Tester / Machine RDT-1000 - Drop Testing Machine

Rotating Drum Tester RDT-1000 for smart phones, moblie phones, and remote controllers.

Fragility test for smart phones, moblie phones, and remote controllers by repeatedly dropping tests with rotating drum tester.

 

FeatureRemote type step less transmission controlling motor keeps high precision rotation at all time.
Two large and small rolling drums are parallel which is gearing with flanges.
Clear windows are found on each drum for confirming the dropping specimen.
For the safe operations, the guard walls are available.

Applications
Repeatedly drop tests for the shock resistance.
Fragility test for smart phones, moblie phones, and remote controllers

Specifications

Model

RDT-1000

Specimen max weight

5 kg

(approx lbs)

11 lbs

Drop height range

500 mm up to 1000 mm

(approx inch)

20 inch up to 39 inch

Fall frequency per min

5 times up to 20 times per min

The number of process runs

1 up to 99999

Size (W x H x D mm)

1400 x 1640 x 1600

(approx inch)

39 x 102 x 69

Size of controller (W x H x D mm)

520 x 550 x 400

(approx inch)

20 x 22 x 16

Power supply

AC200V 3 phase 2kw

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

Cell Phone Drop Tester Machine

Drop Tester / Drop Machine for cell phones & smartphones - Drop Testing Machine

Enable to test the endurance against drop impact. DT-202 provide fragility test for smart phones, cell phones and other mobile gadgets. The specimen holding system can keep the dropping posture, enable to provide drop tests superior in reproducibility.

Drop Tester DT-202 comply with CE marking requirements.

Feature Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
Safety design – the electromagnetic holder never release the specimen holding system till it’s energized.

Applications
Drop test for digital gadgets ; smart phones, cell phones, and digital gadgets.
Drop test for any electrical parts and small, light-weight object.

Model

DT-202

Specimen max weight

2 kg

(approx lbs)

4.4 lbs

Drop height range (mm)

250 mm up to 2000 mm

(approx inch)

10 inch up to 78 inch

Drop height setting

Scale and setting pointer

Holding / Releasing specimen

Pneumatic pen cylinder

Size (W x H x D mm)

600 x 2382 x 500

(approx inch)

23.62 x 93.78 x 19.69

Weight

80 kg

(approx lbs)

176 lbs

Power supply

100-240V single-phase 5A

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

Supply Air Pressure

0.49Mpa is required ( 1.2dm3 when tests 6 times / min )

 

Mobile Phone Drop Tester Machine

Mobile Phone Drop Tester Machine - Drop Testing Machine :-
Enable to test the endurance against drop impact. DT-202TB is modified from DT-202 by expanding the specimen holding range to cover the growing tablet terminal test requirement. The specimen holding system can provide the drop tests superior in reproducibility.
Drop Tester DT-202TB comply with CE marking requirements.

Feature:- Keep the dropping posture with pneumatic pen cylinder. The impact point can be controlled easily.
The drop height can be settled flexibly by scale, and the specimen holding system is fixed firmly with the electromagnetic holder.
Safety design –
The electromagnetic holder never release the specimen holding system till it’s energized.

Applications
Drop test for tablet terminal and mobile computers.
Drop test for any electrical parts and small, light-weight object.

 

Specifications

Model

DT-202-TB

Specimen max weight

2 kg

(approx lbs)

4.4 lbs

Drop height range (mm)

250mm to 2,000mm

(approx inch)

10 inch to 78 inch

Drop height setting

Scale and setting pointer

Holding / Releasing specimen

Pneumatic pen cylinder

Size (W x H x D mm)

600 x 2382 x 616

(approx inch)

24 x 94 x 24

Weight

80 kg

(approx lbs)

176 lbs

Power supply

100-240V single-phase 5A

Applied Standards

JIS C 60068-2-31, IEC 60068-2-31

Supply Air Pressure

0.49Mpa is required ( 1.2dm3 when tests 6 times / min )

 

Single Drop Shock Tester Machine

Single Drop Shock Tester / Shock Machine SDST Series- Shock Testing Machine :-

Specifications

Model

SDST-300

SDST-500

SDST-700

SDST-900

SDST-1100

SDST-1500

Table size (mm)

300 x 300

500 x 500

700 x 700

920 x 920

1150 x 1150

1500 x 1500

(approx inch)

12 x 12

20 x 20

36 x 36

36 x 36

45 x 45

59 x 59

Specimen max weight

50 kg

80 kg

100 kg

200 kg

300 kg

500 kg

(approx lbs)

110 lbs

176 lbs

220 lbs

440 lbs

661 lbs

1102 lbs

Shock pulse

Half-sine

Acceleration range

100 - 3000 m/s2 (10-300G)

Pulse duration range

3 ms, 6 ms, 11 ms, 20 ms

Size (mm)
(W x D x H)

1100 x 640 x 2300

1300 x 700 x 2400

1600 x 900 x 2900

1800 x 1150 x 3200

2200 x 1300 x 3300

2500 x 1800 x 4100

(approx inch)

43.31 x 25.20 x 90.55

51.18 x 27.56 x 94.49

62.99 x 35.43 x 114.17

70.87 x 45.28 x 125.98

86.61 x 51.18 x 129.92

98.43 x 70.87 x 161.42

Capacity

900 kg

2500 kg

3500 kg

5000 kg

9000 kg

12000 kg

(approx lbs)

1984.13 lbs

5511.46 lbs

7716.05 lbs

11022.93 lbs

19841.27 lbs

26455.03 lbs

Controller size
(W x D x H mm)

520 x 400 x 950

(approx inch)

20.47 x 15.75 x 35.43

Power supply

AC200V 3-phasese 10A

AC200V 3-phasese 15A

AC200V 3-phasese 20A

Applied Standards

JIS C 60068-2-27, JIS Z 0202, IEC 60068-2-27, MIL-STD-810F, JIS E 3015

HDST High Speed Drop Shock Tester Machine

High Speed Drop Shock Tester Machine HDST Series - Shock Testing Machine :-

Model

HDST-150

HDST-230

HDST-230HS

HDST-300

Table size (mm)

150 x 160

230 x 230

230 x 230

300 x 300

(approx inch)

6 x 6.3

9 x 9

9 x 9

12 x 12

Specimen max weight(kg)

1

10

5

30

(approx lbs)

2

22

11

44

Shock pulse

Half-sine

Acceleration range (m/s2)

14700
(1500G)

29400
(3000G)

49000
(5000G)

29400
(3000G)

Pulse duration range (ms)

0.5, 1.0

0.5, 1.0, 2.0

0.5, 1.0, 2.0

0.5, 1.0, 2.0

Seismic base

Pneumatic springs and hydraulic damper device

Brake mechanism

Pneumatic-hydraulic friction brake system

Controller

Manual & auto cycle control

Size (W x D x H mm)

1000 x 800 x 2330

1000 x 600 x 2675

1000 x 600 x 3970

1100 x 640 x 2700

(approx inch)

39 x 31 x 92

39 x 23 x 105

39 x 23 x 156

43 x 25 x 106

Capacity (kg)

600

1200

1400

1500

(approx lbs)

1322

2645

3086

3307

Controller Size
(W x D x H mm)

520 x 400 x 950

520 x 400 x 950

520 x 400 x 950

520 x 400 x 950

(approx inch)

20 x 15 x 37

20 x 15 x 37

20 x 15 x 37

20 x 15 x 37

Power supply

200V-10A

Applied Standards

JEDEC (JESD22-B111), JEITA (ET-7409/106)
JIS C 60068-2-27, IEC 60068-2-27-87

Infrared Ray Test Chamber

Specifications:
  • Evaluate product performance in a multilateral environment of infrared rays(I.R) and thermohygrostat
  • High-precision control possible within a wide range of temperature and humidity (-70  ∼ 200 )
  • Product surface temperature reaching time: reaches (90 ∼ 120  , ±2 within 15 min
  • Exclusive controller with easily usable LCD Touch Screen Method
  • Freon alternatives(R404A) for environmental production
  • Various safety devices have been applied
Looking for Drop Testing Machine ?
© Sams Advanced Climatic Technologies Pvt Ltd
 
Desktop Site Back to top